Greater Manchester Fire and Rescue Service
146 Bolton Road
Tel: 0161 736 5866
For a FREE Safe and Well visit please call:
Fires in the home can be caused by faulty electrical appliances, plugs and cables that are old or poorly wired can be a real danger. Just because there's no flame, doesn't mean there's no fire risk. Find out what to check for to ensure your appliances don't put you or your family or housemates at risk from fire.
There are particular danger signs to look out for on all electrical items you have around your home. If you think something needs fixing or changing, do it straight away. You can access the Electrical Safety Council's Socket Overload Calculator to check if you are overloading your sockets and putting your home at risk of fire.
You can also register your appliance with the Association of Manufacturers of Domestic Appliances for a safer home. For further information, click here.
You can access the Electrical Safety Council's (ESC) Socket Overload Calculator to check if you are overloading your sockets and putting your home at risk of fire. The ESC also have a product recall facility, enabling you to check that the products in your home are safe. Please see details below.
Tumble dryer safety advice
GMFRS is currently experiencing an increase in incidents involving tumble dryers.
We would like you to read the following advice and information to ensure that you are safer in your home when using your tumble dryer.
Tumble dryers have been around for a long time, and used safely they can be a useful addition to your household. However, if fluff is allowed to accumulate in the filter, near blocked vents, and at the rear of your dryer you increase the risk of this fluff catching fire from the heat created by the dryer.
To stay safe we recommend you follow the below points:
We would also like to also remind you that there has recently been two types of tumble dryers manufactured by Hotpoint, Indesit and Creda between April 2004 and September 2015, that have been recalled due to fears that excess fluff may come into contact with the heating element and catch fire. You can find more information by using the Electrical Safety Council's product recalls tool above.
If you have bought a Hotpoint, Indesit, Creda, Swan and Proline tumble dryer between April 2004 and September 2015 we advise you to read the information within the following link: http://www.electricalsafetyfirst.org.uk/product-recalls/2016/03/hotpoint,-indesit,-creda,-swan-and-proline-tumble-dryers/
If you have an appliance that has been recalled we advise you to stop using it until it has been inspected and declared safe to use by a manufacturer's engineer.
For plugs and sockets, look out for the following:
The risks with cables and leads include:
For electrical appliances, you should never:
See 'Electric blankets and heaters - safe use' for more information about using these items safely.
Follow the guidelines below to make sure your electrical items are safe to use.
Electrical appliances, especially ones that run at high speeds and contain motors, like washing machines, should be serviced once a year by a qualified electrician.
Plugs, sockets and cables also need to be used correctly, you should:
Calculate whether your sockets are overloaded via the Electrical Safety First website.
The fuse in a plug is a safety device designed to protect the lead rather than the appliance. It is a deliberate weak link in a circuit, which will blow if an electrical appliance or extension lead draws too much current due to either an overload or a fault.
The blown fuse cuts off the electricity to stop the lead and appliance from overheating and causing a fire.
Appliances meeting the relevant product safety standards will always be fitted with a plug, which has a correctly-rated fuse.
If you have to replace a fuse because it has blown, you must check why the fuse has blown correct the fault in the appliance and then replace the fuse with a new fuse of the same rating.
As a rule of thumb, fuses are rated according to the power rating of the appliance.
Plugs for appliances rated up to about 700 watts should have a 3 amp fuse, which is coloured red.
Plugs for appliances rated between about 700 watts and 3000 watts - the maximum rating of a wall socket- should be fitted with a 13 amp fuse, which is coloured brown.
Occasionally older appliances were fitted with 5 amp fuses which are coloured black. These fuses are still available to buy.
If there is an electrical fire, pull the plug out, or switch off the power at the fuse box - if it is safe to do so. Sometimes this can stop the fire immediately.
Never use water on an electrical fire, and don't take any risks with your safety - get out, stay out and call 999.